3Com VCX V7000 Installation Manual page 298

298 C 7: I
HAPTER NSTALLING AN
Sample Services Configuration Script — Primary Authentication and Directory Server
(continued)
--------- Configuring additional parameters for Auth & Dir Service ---------
VCX Authentication & Directory Services can provide support for System
Speed Dials. This feature must be enabled only for a single Site ID, and if
replication is in use, the setting must be the same on the primary and
secondary servers for that Site ID. IMPORTANT CAUTION: This setting cannot be
changed once initial setup is complete, so be certain it is set correctly.
Enable System Speed Dial Master? [N]
The LDAP Synchronization feature automatically synchronizes user accounts on the VCX
IP Telephony system with users retrieved from an LDAP server. To enable LDAP
Synchronization on this system, say 'Y' here.
Enable LDAP Synchronization [N]
Do you wish to change any of the Auth & Dir Service parameters? [N] :
------------ Configuring additional parameters for Common Agent ------------
The Trap Destination specifies the IP address to be used as a destination
when this system sends SNMP traps.
Trap Destination
A D
UTHENTICATION AND IRECTORY
At a regional site, enter Y for the Primary Authentication and Directory
Server and remember to answer Y when you configure the associated
Secondary Authentication and Directory Server. In supported VCX
configurations, the primary and secondary servers are located in different
regional offices.
Press the Enter or Return key to accept the default answer (N). If you
answer Y to this question, the script presents each of the items that you
have entered during the most recent part of the script and allows you to
accept the value or change it.
Enter the IP address of the PC or other system on which you are running
your network management software (for example, EMS).
S
ERVER
: Y
: