3Com VCX V7000 Installation Manual page 207

Sample Services Configuration Script — Secondary IP Messaging Server (continued)
Are you absolutely certain that you wish to configure this system as an 'IP
Messaging Services' server?
alternative configuration.
Confirm selection? [no] : yes
Selection confirmed.
----------------------------------------------------------------------------
------------- Welcome to the VCX Service Configuration Wizard --------------
----------------------------------------------------------------------------
This wizard sets up VCX services.
Do you wish to configure services at this time? [Y]
------------------------- Configuring VCX Services -------------------------
This system runs IP Messaging services.
Please enter the role of this system:
1 - This is a regional office, primary IP Messaging server OR a standalone IP
Messaging server.
2 - This is a regional office, secondary IP Messaging server.
3 - This is a branch office IP Messaging system.
4 - This system is a client in an IPMSG client-server deployment.
5 - This is an NBX IP Messaging server.
Enter your choice by number [1] : 2
Services running on this system need to communicate with other systems and
devices in order to operate.
asked for information about these, and for other global parameters.
The site ID is a unique value which identifies a particular site in a
multi-site VCX installation.
consisting of letters and/or numbers.
or tabs may be used. Note: the site ID cannot be changed after initial setup is
complete, so choose the value carefully.
If you answer 'no' here you can choose an
Enter yes to confirm your choice.
The script prints several configuration messages.
Press the Enter or Return key to accept the suggested answer (Y).
Enter 2 to configure this server as the Secondary IP Messaging server.
In the next series of questions, you will be
It is a string of up to 11 characters,
No punctuation characters, spaces,
:
207