3Com VCX V7000 Installation Manual page 402

402 A B: R
PPENDIX EPLACING A
F D VCX S
AILED ISK ON A
c On down server, install the same codec.
cd /usr/app/app.dir
./change_codec g711u
6 Ensure that the language packages that are installed on the running
server are installed on the down server.
a On the running server, log in as root.
b Enter these commands:
cd /opt/3com/VCX/UMS/app/app.dir
grep sys_lang vmail.cfg
The output from this command lists the language packages that are
installed.
Example:
sys_lang=SP_Spanish,f2,qu
If no languages other than the default (United States English) have been
installed on your VCX system, the grep command returns nothing.
c On the down server, install each of the listed language packages.
CAUTION: Install the language file that corresponds to the appropriate
codec. Installing the incorrect file name will cause system problems. The
name of each language file contains the codec type within it. For
example, IPMSG-SP-SP-G711u-SPEAK-1-2.i386.rpm indicates that the file
is configured to use the G711u codec.
cd /opt/installtemp/
For each language package that you want to install, use the vcx-install
command with the appropriate file name.
Example:
vcx-install IPMSG-SP-SP-G711u-SPEAK-1-2.i386.rpm
7 To add each of the languages that you just installed, enter these
commands.
cd /opt/3com/VCX/UMS/app/app.dir
./add_language
Follow the instructions to add the languages that you want.
8 Restart VCX services on the Primary IP Messaging Server.
a Log in as root. The default password for the root account is pvadmin.
CAUTION: 3Com strongly recommends that customers change this
password on all VCX servers. Guidelines about other passwords and other
security-related issues can be found in the "VCX Security Guide."
ERVER