10Simulation Mode - Emerson Rosemount 2410 Reference Manual

Reference Manual
00809-0100-2410, Rev DA
6.2.10 Simulation mode
The Simulation Mode function lets you verify communication between a Rosemount 2410 Tank Hub and
a host system without connecting actual field devices. The Rosemount 2410 Tank Hub Simulation window
allows you to choose which parameters to be calculated by the Rosemount 2410. Calculations are based
on input from simulated tank measurement data such as product level, average temperature, liquid
pressure, and other variables.
The Simulation HREGS holding registers (starting with register number 3800) lets you specify the
desired simulation data.
For information on how to view and edit holding registers, see
page 78
1. In the TankMaster WinSetup workspace select the Rosemount 2410 icon.
2. Click the right mouse button and choose the Simulation option to open the Rosemount 2410 Tank
Hub Simulation window:
3. Choose simulation mode Single Tank and the desired tank in the Tank Position field, or choose the All
option to simulate all tanks connected to the Rosemount 2410. Tank Position refers to the position in
the Rosemount 2410 tank database.
4. In the Simulation Time field, enter for how long the simulation will continue.
Simulation can be stopped at any time by pressing the Stop button.
5. Calculate Parameter.
In the standard configuration the check-boxes are unchecked, which means that each simulation
parameter is given a specific standard simulation value as specified in the simulation holding register
area:
Table 6-2. Simulation paramters
Simulation Parameter
Average Temperature
Total Observed Volume
Observed Density
Service and Troubleshooting
or the Rosemount Tank Gauging System Configuration Manual (Document No. 00809-0300-5100).
"Viewing Input and Holding registers" on
Simulation Holding Register
HR3868
HR3994
HR3976
Service and Troubleshooting
March 2017
89