Warning Messages - Emerson Rosemount 2410 Reference Manual

Reference Manual
00809-0100-2410, Rev DA
6.3.2

Warning messages

Warning messages are displayed in the Rosemount Tankmaster program. Input Register 1004 provides
an overview of active device warnings (see
registers" on page 78
TankMaster WinSetup).
For each warning message that may appear in Input register 1004, detailed information can be found in
Input registers 6200 to 6248 as shown in
Table 6-5. Warning message descriptions
Message
RAM warning
FPROM warning
Hreg warning
SW warning
Other memory warning
System warning
Display warning
Aux warning
FF stack warning
Tankbus communication warning
Host communication warning
Data Manager warning
Configuration warning
Service and Troubleshooting
"Diagnostics" on page 84
for information on how to view diagnostics and various Input registers in
Table
Description
Input register no. 6200.
Input register no. 6204.
Input register no. 6208.
Input register no. 6212.
Input register no. 6216.
Bit 1: Stack
Input register no. 6220.
Input register no. 6224.
Bit 0: Communication
Bit 1: Configuration
Input register no. 6228.
Bit 0: Internal temperature
Bit 1: Power
Input register no. 6232.
Input register no. 6236.
Bit 0: Device restarted
Bit 1: Device open failed
Bit 2: Device address changed
Bit 3: Live List no free position
Bit 4: Port changed
Bit 5: Exceeded FF number of retries
Bit 6: Power failure
Bit 7: Ground failure
Input register no. 6240.
Bit 0: Multiple configuration
Bit 1: Primary bus configuration
Bit 2: Secondary bus configuration
Input register no. 6244.
Bit 0: Frozen data
Bit 1: TMV mapping
Input register no. 6248.
Bit 0: Invalid strapping table
Bit 1: Tank configuration
Bit 11: Model Code invalid string
Bit 12: Model Code invalid code
Service and Troubleshooting
or "Viewing Input and Holding
6-5.
Action
Contact Emerson Automation
Solutions/Rosemount Tank Gauging
service department.
March 2017
103