Emerson Rosemount 2410 Reference Manual page 83

Reference Manual
00809-0100-2410, Rev DA
Example
In case of a device error, the red LED will repeat a flash sequence that corresponds to the particular type
of error that occurred. For example, in case of a Display error (code=6), the LED will show a sequence of 6
flashes followed by a 5 seconds pause. After the pause the flashing starts over again in the same manner.
This flash/pause sequence will be continuously repeated.
Display error (code 6) appears with the following Error LED (red) flash sequence as illustrated in
Figure
Figure 5-5. Error code flash sequence
See "Error messages" on page 105
Operation
5-5:
for more information.
Seconds
Operation
March 2017
73