14Logging Measurement Data - Emerson Rosemount 2410 Reference Manual

Service and Troubleshooting
March 2017
6.2.14 Logging measurement data
The Rosemount 2410 supports logging of diagnostic registers. This function is useful for verifying that
the gauge works properly. The logging function can be accessed by using the TankMaster WinSetup
program. To start logging do the following:
1. Start the TankMaster WinSetup program.
2. Select the Rosemount 2410 Tank Hub icon in the WinSetup workspace.
3. Click the right mouse button and choose Logging:
4. The Manual mode lets you start logging at any time. In Automatic mode you have to specify a Start
and Stop time.
5. The resulting log file will not exceed the size specified by the Max File Size parameter.
In automatic mode logging will proceed until the stop date and time is reached.
In manual mode logging will proceed until it is stopped by clicking the Stop button.
Logging will stop automatically when the number of log files is equal to the number given by the Max
Log Files parameter.
6. The log file can be viewed in any word processing program. It is stored as a plain text file in the
following folder:
C:\Rosemount\Tankmaster\Setup\Log, where C is the disk drive where the TankMaster software is
installed.
The log file contains the same input registers as the View Diagnostic Registers window, see
"Diagnostics" on page
You can change which input registers to be included in the log file by configuring the View Diagnostic
Registers window, see the Rosemount Tank Gauging System Configuration Manual (Document No.
00809-0300-5100) for more information.
94
84.
Reference Manual
00809-0100-2410, Rev DA
Service and Troubleshooting