Emerson Rosemount 2410 Reference Manual page 77

Reference Manual
00809-0100-2410, Rev DA
Table 5-1. Measurement variables and presentation on the Rosemount 2410 display
Variable
Level
Ullage
Level Rate
Signal Strength
Free Water Level
Vapor Pressure
Liquid Pressure
Air Pressure
Ambient Temperature
Vapor Average
Temperature
Liquid Average
Temperature
Tank Average
Temperature
Spot 1 Temperature
Spot n Temperature
Spot 16 Temperature
Observed Density
Reference Density
Volume
Flow Rate
User Defined 1
Tank Height
Delta Level
Operation
Presentation on
Description
display
LEVEL Product level
Distance from the upper reference point to the product
ULLAGE
surface
LRATE The speed of level movement up or down
SIGN S Signal amplitude of the surface echo
FWL Free water level at the bottom of the tank
VAP P Automatic or manual Vapor Pressure value
LIQ P Automatic or manual Liquid Pressure value
AIR P Automatic or manual Air Pressure value
AMB T Automatic or manual Ambient Temperature value
VAP T Average temperature of vapor above the product surface
LIQ T Average temperature for all spot sensors submersed in liquid
TANK T Average value of all temperature sensors in the tank
TEMP 1 Temperature value for spot sensor no. 1
TEMP n Temperature value for spot sensor no. "n"
TEMP 16 Temperature value for spot sensor no. 16
OBS D Automatic or manual Observed Density
Product density at standard reference temperature 15°C
REF D
(60°F)
TOV Total observed volume
F RATE Flow rate
UDEF 1 Up to 5 user defined variables
TANK R Distance from Tank Reference Point to Zero Level
LVL
The difference between two level values
Operation
March 2017
67