GFK-2436M
Common Interface Mode Settings
Common I/F Mode Setting
RS-232C, 8-bit, No Parity, 1 stop bit
RS-232C, 7-bit, Even Parity, 1 stop bit
Flow
Flow control sets the local handshaking method for stopping serial input/output. This should be set to zero
always.
Port Number
The setting represents the source port number in TCP connections. It identifies the channel for remote
initiating connections. The range is 1-65535, except for the following.
Port numbers
Reserved for
1-1024
Reserved (well known ports)
9999
TELNET Setup
14000-14009
Reserved for Redirector
30704
Reserved (77F0h)
30718
Reserved (77FEh)
WARNING
Do not use the reserved port numbers for this setting because incorrect operation may result.
Connect Mode
Connect Mode defines how the unit makes a connection, and how it reacts to incoming connections over the
network.
Connection Mode Option
Incoming Connection
Never accept incoming
Always accept
Response
Nothing (quiet)
Character response
C = Connect,
D= disconnect,
N = Unreachable
Active Startup
With any character
Binary
0100 1100
0111 1000
7
6
5
4
3
0
0
0
1
1
0
0
1
0
Hex
4C
78
2
1
0
0
0
1
June 2023
12