Device Status - Emerson Rosemount 2410 Reference Manual

Service and Troubleshooting
March 2017
6.3.1

Device status

The current device status is shown in Input Register 1000. You can view the device status register by
opening the Diagnostic window (see
"Viewing Input and Holding registers" on page
Double-clicking the Value field of the Device Status register opens an expanded bitfield window with
information on the current device status as shown in
Figure 6-4. Input Register Device Status
Table 6-4. Device status messages
Message
Device Warning
Device Error
Simulation Mode Active
Write Protected
102
"Diagnostics" on page
Double-click the Value field to open
the Expanded Bitfield window
Bit no. Description
1
A device warning is active.
7
A device error is active.
8 Simulation mode active.
18
The device is write protected with a
switch or in the TankMaster
WinSetup program.
84) or the View Input Registers window (see
78).
Figure 6-4.
See
page 103
See
for details.
Stop Simulation mode.
Check the write protection switch,
see
page
Check write protection state in
TankMaster WinSetup, see
protection" on page
Reference Manual
00809-0100-2410, Rev DA
Action
"Warning messages" on
for details.
"Error messages" on page 105
"Write protection switch" on
88.
"Write
87.
Service and Troubleshooting