Installing A Rosemount 2460 System Hub - Emerson Rosemount 2410 Reference Manual

Configuration
March 2017
4.6.3

Installing a Rosemount 2460 System Hub

In case the Rosemount Tank Gauging system includes a Rosemount 2460 System Hub, it should be
installed prior to installing the Rosemount 2410 Tank Hub.
Installation includes the following basic steps:
1. Ensure that the Rosemount TankMaster WinSetup program is up and running.
2. Enable and configure a Protocol Channel in order to establish communication with the appropriate
port on the TankMaster PC.
3. Start the installation wizard in TankMaster WinSetup
a. Click the right mouse button on the Devices folder.
b. Choose the Install new option.
4. Choose device type 2460 System Hub.
5. Specify a name tag in the 2460 System Hub Tag input field. This tag will be used as an identifier of the
system hub in various windows and dialogs.
6. Click the Next button to proceed with the installation wizard.
7. Verify communication with the host computer/TankMaster PC.
8. Verify that Host ports and Field ports are properly configured. Host ports are used for communication
with TankMaster work stations or other host systems. Field ports are used for communication with
field devices such as the Rosemount 2410 Tank Hub, the Rosemount 5900S Radar Level Gauge, and
others.
9. Configure the tank database. Ensure that Modbus Addresses of the connected devices are properly
set. These addresses must correspond to the Rosemount 2410 Tank Hub database settings.
See the
Rosemount 2460 System Hub.
64
Rosemount 2460 System Hub Reference Manual
00809-0100-2410, Rev DA
for more information on how to setup the
Reference Manual
Configuration