Figure 39. Lithium Battery - Teledyne WORKHORSE Operation Manual

May 2015
7. Install the new battery assembly (VL2330). Please note the battery pins; the battery can only be
installed one way.
8. Verify the voltage holds stable at approximately 3 VDC (see
step 2).
9. Replace the transducer head
Page 80
EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.
Figure 39. Lithium Battery
assembly. Make sure to use new O-rings and desiccant.
WorkHorse H-ADCP Operation Manual
Testing the Lithium Battery Voltage,