Date Of Manufacture; Environmental Friendly Use Period (Efup); Weee - Teledyne WORKHORSE Operation Manual

May 2015

Date of Manufacture

China RoHS requires that all Electrical and Electronic Products are marked with a Date of Manufacture.
This is the starting point for the Environmental Friendly Use Period, described below.

Environmental Friendly Use Period (EFUP)

Per SJ/T 11364-2006 – Product Marking, the EFUP is defined as the time in years in which hazard-
ous/toxic substances within Electrical and Electronic Products (EIP) will not, under normal operating
conditions, leak out of the Product, or the Product will not change in such a way as to cause severe envi-
ronmental pollution, injury to health, or great damage to property. TRDI has determined the Environ-
mental Friendly Use Period shall be Ten (10) years.
The purpose of the marking is to assist in determining the restricted substance content, recyclability, and
environmental protection use period of our covered products, as required in Chinese law, and does not
reflect in any way the safety, quality, or warranty associated with these TRDI products.
Some homogenous substance within the EIP contains toxic or hazardous substances or elements
above the requirements listed in SJ/T 11363-2006. These substances are identified in Table 52.

WEEE

The mark shown to the left is in compliance with the Waste Electrical and Electronic Equipment
Directive 2002/96/EC (WEEE).
This symbol indicates the requirement NOT to dispose the equipment as unsorted municipal waste,
but use the return and collection systems according to local law or return the unit to one of the TRDI
facilities below.
Teledyne RD Instruments USA
14020 Stowe Drive
Poway, California 92064
CE
This product complies with the Electromagnetic Compatibility Directive 89/336/EEC, 92/31/EEC.
The following Standards were used to verify compliance with the directives: EN 61326(1997),
A1(1998), A2(2001) – Class "A" Radiated Emissions.
Page 244
EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.
Teledyne RD Instruments Europe
2A Les Nertieres
5 Avenue Hector Pintus
06610 La Gaude, France
WorkHorse H-ADCP Operation Manual
Teledyne RD Technologies
1206 Holiday Inn Business Building
899 Dongfang Road, Pu Dong
Shanghai 20122 China