Connecting To The H-Adcp - Teledyne WORKHORSE Operation Manual

WorkHorse H-ADCP Operation Manual

Connecting to the H-ADCP

To connect to the H-ADCP:
EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.
Start BBTalk
Start the BBTalk program (for help on using BBTalk,
see the RDI Tools User's Guide).
On the Connect To screen, select WorkHorse.
Select the COM port the H-ADCP cable is connected to.
Click Next.
Enter the Baud Rate, Parity, Stop Bits, and Flow Con-
trol. If you are unsure of the settings, leave them at
the default settings as shown.
Click Next.
Click Finish.
May 2015
Page 9