Collecting Data With Surfaceview - Teledyne WORKHORSE Operation Manual

May 2015

Collecting Data with SurfaceView

This section has simple instructions for collecting current profile data with a H-ADCP.
SurfaceView runs on Windows XP® only; it will not operate on Windows 7® or 8®.
Page 32
EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.
WorkHorse H-ADCP Operation Manual
Start SurfaceView
Start SurfaceView by double clicking the SurfaceView
icon.
On the Start Wizard, click Real-Time Data Acquisition.
Click Next.
Setup Communications
A message box will display whenever the wizard is
waiting for a response from the COM port device.
If the connection did not get automatically made, on
the Communications Settings dialog box, select the
COM Port, Baudrate, Databits, and Stopbits that the
H-ADCP is connected to. If you are unsure of the set-
ting, use Auto Detect.
Click Next.