System Overview - Teledyne WORKHORSE Operation Manual

WorkHorse H-ADCP Operation Manual

System Overview

The H-ADCP transducer assembly contains the end-cap, housing, transducer ceramics, and electronics.
The standard acoustic frequencies are 600 and 300 kHz. See the
sions and weights.
Picture
EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.
Outline Installation Drawings
Description
The Input/Output (I/O) cable connects the H-ADCP to the
computer and external power supply. When the cable is not
connected, use the dummy plug to protect the connector.
The optional pressure sensor (standard 200 Bar) measures
water pressure (depth).
The orange urethane faces covers the transducer ceramics.
Never set the transducer on a hard surface. The urethane
faces may be damaged.
The standard H-ADCP housing allows deployment depths to
200 meters.
The H-ADCP electronics and transducer ceramics are
mounted to the transducer head.
May 2015
for dimen-
Page 3