Command Descriptions; Help Menus - Teledyne WORKHORSE Operation Manual

WorkHorse H-ADCP Operation Manual

Command Descriptions

Each listing includes the command's purpose, format, default setting (if applicable) range, recommended
setting, and description. When appropriate, we include amplifying notes and examples. If a numeric value
follows the command, the H-ADCP uses it to set a processing value (time, range, percentage, processing
flags). All measurement values are in metric units (mm, cm, and dm).
? – Help Menus
Purpose Lists the major help groups.
Format x? (see description)
Description Entering ? by itself displays all command groups. To display help for one command
group, enter x?, where x is the command group you wish to view. When the H-ADCP dis-
plays the help for a command group, it also shows the format and present setting of those
commands. To see the help or setting for one command, enter the command followed by
a question mark. For example, to view the WP-command setting enter WP?.
Examples See below.
[BREAK Wakeup A]
WorkHorse Broadband H-ADCP Version 16.xx
Teledyne RD Instruments (c) 1996-2005
All Rights reserved.
>?
Available Menus:
DEPLOY? ------------------ Deployment Commands
SYSTEM? ------------------ System Control, Data Recovery and Testing Commands
Available Commands:
C? ----------------------- CONTROL Commands
E? ----------------------- ENVIRONMENTAL SENSORS Commands
P? ----------------------- PERFORMANCE Commands
S? ----------------------- RDS^3 SYNCHRONIZATION Commands
T? ----------------------- TIMING Commands
W? ----------------------- WATER PROFILING Commands
R? ----------------------- RECORDER Commands
A? ----------------------- SENSOR/COMPASS Commands
O? ----------------------- FEATURE Commands
D? ----------------------- APPLIED MICROSYSTEMS Commands
?? ----------------------- DISPLAY Quick Menus
>
EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.
May 2015
Page 123