Installing Firmware Upgrades - Teledyne WORKHORSE Operation Manual

WorkHorse H-ADCP Operation Manual

Installing Firmware Upgrades

The firmware for H-ADCPs in located on flash RAM chips on the CPU board. Firmware upgrades can be
downloaded from TRDI's website support page (www.rdinstruments.com). If the firmware upgrade is not
available via the web, then please contact Field Service (rdifs@teledyne.com) to request a copy.
To install a firmware upgrade:
1. Connect the H-ADCP to the computer as shown in
2. Start the program HAxxx.exe (where xxx is the firmware number). Click the Setup button.
3. Click Setup. Click the View README.TXT button to view the Readme.txt file for details on
what is new in this version of the firmware.
4. Click Next and follow the on-screen prompts.
5. If you are not able to install the new firmware, contact Customer Service.
6. After successfully upgrading the firmware, use BBTalk to test the H-ADCP (see
ADCP).
EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.
Setting up the H-ADCP
May 2015
System.
Testing the H-
Page 63