AudioCodes Mediant 1000B User Manual page 1133

Gateway & enterprise sbc
Hide thumbs Also See for Mediant 1000B:
Table of Contents

Advertisement

User's Manual
Parameter
Call Forward Reminder Ring Parameters
Note:
These parameters are applicable only to FXS interfaces.
For a description of this feature, see Call Forward Reminder Ring on page 579.
Enable NRT Subscription
configure voip > gateway
dtmf-supp-service supp-
service-settings > nrt-
subscription
[EnableNRTSubscription]
AS Subscribe IPGroupID
configure voip > gateway
dtmf-supp-service supp-
service-settings > as-
subs-ipgroupid
[ASSubscribeIPGroupID]
NRT Subscribe Retry
Time
configure voip > gateway
dtmf-supp-service supp-
service-settings > nrt-sub-
retry-time
[NRTSubscribeRetryTime]
Call Forward Ring Tone
ID
configure voip > gateway
dtmf-supp-service supp-
service-settings > cfe-
ring-tone-id
[CallForwardRingToneID]
Version 7.2
FORMAT FwdInfo_Index = FwdInfo_Type, FwdInfo_Destination,
FwdInfo_NoReplyTime, FwdInfo_Module, FwdInfo_Port;
[\FwdInfo]
Where,
Module = Module number, where 1 denotes the module in Slot 1.
Port = Port number, where 1 denotes Port 1 of a module.
For example:
Below configuration forwards calls originally destined to Port 1 of
Module 1 to "1001" upon On Busy:
FwdInfo 0 = 1,1001,30,1,1;
Below configuration forwards calls originally destined to Port 2 of
Module 1 to an IP address upon On Busy:
FwdInfo 1 = 1,2003@10.5.1.1,30,1,2;
For more information, see Configuring Call Forward on page 624.
Note: The parameter is applicable only to analog interfaces.
Enables endpoint subscription for Ring reminder event notification
feature.
[0] Disable (default)
[1] Enable
Defines the IP Group ID that contains the Application server for
Subscription.
The valid value range is 1 to 8. The default is -1 (i.e., not configured).
Defines the Retry period (in seconds) for Dialog subscription if a previous
request failed.
The valid value range is 10 to 7200. The default is 120.
Defines the ringing tone type played when call forward notification is
accepted.
The valid value range is 1 to 5. The default is 1.
1133
65. Configuration Parameters Reference
Description
Mediant 1000B Gateway & E-SBC

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents