AudioCodes Mediant 1000B User Manual page 961

User's Manual
are identified by a session ID ("SID"), described in detail in the table below. The
following is an example of a SIP-session related Syslog message:
13:10:57.811 : 10.13.4.12 : NOTICE
(lgr_flow)(63)
address 10.33.2.42:5060 [Time: 04-19-2012@18:29:39]

Board logs: Logs relating to the operation of the device (infrastructure) that are non-
call session related (e.g., device reset or Web login). These logs are identified by a
board ID ("BID"), described in detail in the table below. The following is an example of
a board Syslog message:
10:21:28.037 : 10.15.7.95 : NOTICE
Activity Log: WEB: Successful login at 10.15.7.95:80. User:
Admin. Session: HTTP (10.13.22.54)
The format of the Syslog message is described in the following table below:
Message Item
Message Types
Message Sequence Number
[S=<number>]
Version 7.2
UdpTransportObject#0- Adding socket event for
Table 58-3: Syslog Message Format Description
Syslog generates the following types of messages:

ERROR: Indicates that a problem has been identified that
requires immediate handling.

WARNING: Indicates an error that might occur if
measures are not taken to prevent it.

NOTICE: Indicates that an unusual event has occurred.

INFO: Indicates an operational message.

DEBUG: Messages used for debugging.
Note:

The INFO and DEBUG messages are required only for
advanced debugging and by default, they are not sent by
the device.

When viewing Syslog messages in the Web interface,
these message types are color coded.
By default, Syslog messages are sequentially numbered in
the format [S=<number>], for example, "[S=643]". A skip in
the number sequence of messages indicates a loss of
message packets. For example, in the below Syslog,
messages 238 through 300 were not received. In other
words, 63 Syslog messages were lost (the sequential
numbers are indicated below in bold font):
18:38:14. 52 : 10.33.45.72 : NOTICE:
[S=235][SID:2ed1c8:96:5] (lgr_psbrdex)(619)
recv <-- DIGIT(0) Ch:0 OnTime:0
InterTime:100 Direction:0 System:1 [File:
Line:-1]
18:38:14. 83 : 10.33.45.72 : NOTICE:
[S=236][SID:2ed1c8:96:5] (lgr_flow)(620)
#0:DIGIT_EV [File: Line:-1]
18:38:14. 83 : 10.33.45.72 : NOTICE:
[S=237][SID:2ed1c8:96:5] (lgr_flow)(621)
#0:DIGIT_EV [File: Line:-1]
18:38:14.958 : 10.33.45.72 : NOTICE:
[S=301][SID:2ed1c8:96:5] (lgr_flow)(625)
#0:DIGIT_EV [File: Line:-1]
You can disable the inclusion of the message sequence
58. Syslog and Debug Recording
: [S=235][SID:2ed1c8:96:5]
: [S=872] [BID=3aad56:32]
Description
961 Mediant 1000B Gateway & E-SBC
|
|