AudioCodes Mediant 1000B User Manual page 936


CDRs related to RADIUS accounting and sent in RADIUS accounting request
messages. For RADIUS accounting CDRs, you can customize the RADIUS Attribute's
prefix name and ID, for standard RADIUS Attributes and vendor-specific RADIUS
Attributes (VSA). For example, instead of the default VSA name, "h323-connect-time"
with RADIUS Attribute ID 28, you can change the name to "Call-Connect-Time" with
ID 29. The table lets you configure up to 40 RADIUS-accounting CDR customization
rules. For more information on RADIUS accounting, see ''Configuring RADIUS
Accounting'' on page 945.

CDRs stored locally on the device. For local storage of CDRs, you can customize the
name of CDR fields. The table lets you configure up to 64 locally-stored CDR
customization rules. For more information on local storage of CDRs, see ''Storing
CDRs on the Device'' on page 943.
If you do not configure a CDR customization rule for a specific CDR, the device generates
the CDR in a default CDR format (see ''CDR Field Description'' on page 916).
Note:
•
The following standard RADIUS Attributes cannot be customized: 1 through 6, 18
through 20, 22, 23, 27 through 29, 32, 34 through 39, 41, 44, 52, 53, 55, 60
through 85, 88, 90, and 91.
•
If the RTCP XR feature is unavailable (not licensed or disabled), the R-factor VoIP
metrics are not provided in CDRs (CDR fields, Local R Factor and Remote R
Factor) generated by the device. Instead, these CDR fields are sent with the value
127, meaning that information is unavailable.
The following procedure describes how to customize Gateway CDRs through the Web
interface. You can also configure it through ini file (GWCDRFormat) or CLI (configure
troubleshoot > cdr > cdr-format gw-cdr-format).

To customize Gateway CDRs:
1. Open the Gateway CDR Format table (Troubleshoot menu > Troubleshoot tab >
Call Detail Record folder > Gateway CDR Format).
2. Click New; the following dialog box appears:
Figure 57-6: Gateway CDR Format Table - Add Dialog Box
3. Configure CDR format rules according to the parameters described in the table below.
4. Click Apply.
User's Manual
Mediant 1000B Gateway & E-SBC
936 Document #: LTRT-27055