AudioCodes Mediant 1000B User Manual page 1262

Parameter
> ldap-primary-key
[MSLDAPPrimaryKey]
configure voip > sip-definition settings
> ldap-secondary-key
[MSLDAPSecondaryKey]
LDAP Cache Service
configure system > ldap settings >
ldap-cache-enable
[LDAPCacheEnable]
LDAP Servers Table
LDAP Servers
configure system > ldap ldap-
configuration
[LdapConfiguration]
LDAP Server Search Base DN Table
LDAP Server Search Base DN Table
configure system > ldap ldap-servers-
search-dns
[LdapServersSearchDNs]
Management LDAP Groups Table
User's Manual
for the destination number in the AD. This is used instead of
the "PBX" attribute name (configured by the
MSLDAPPBXNumAttributeName parameter).
The default is not configured.
Defines the name of the attribute used as the second query
search key for the destination number in the AD, if the
primary search key or PBX search is not found.
Enables the LDAP cache service.

[0] Disable (default)

[1] Enable
Note:

For the parameter to take effect, a device reset is
required.

For more information on LDAP caching, see ''Configuring
the Device's LDAP Cache'' on page 251.
Defines LDAP servers.
The format of the ini file table parameter is as follows:
[ LdapConfiguration ]
FORMAT LdapConfiguration_Index =
LdapConfiguration_Group,
LdapConfiguration_LdapConfServerIp,
LdapConfiguration_LdapConfServerPort,
LdapConfiguration_LdapConfServerMaxRespondTime,
LdapConfiguration_LdapConfServerDomainName,
LdapConfiguration_LdapConfPassword,
LdapConfiguration_LdapConfBindDn,
LdapConfiguration_Interface,
LdapConfiguration_MngmAuthAtt,
LdapConfiguration_useTLS,
LdapConfiguration_ConnectionStatus;
[ \LdapConfiguration ]
For more information, see ''Configuring LDAP Servers'' on
page 244.
Defines the full base path (i.e., distinguished name / DN) to
the objects in the AD where the query is done, per LDAP
server.
The format of the ini file table parameter is as follows:
[ LdapServersSearchDNs ]
FORMAT LdapServersSearchDNs_Index =
LdapServersSearchDNs_Base_Path,
LdapServersSearchDNs_LdapConfigurationIndex,
LdapServersSearchDNs_SearchDnInternalIndex;
[ \LdapServersSearchDNs ]
For more information, see ''Configuring LDAP DNs (Base
Paths) per LDAP Server'' on page 247.
1262
Mediant 1000B Gateway & E-SBC
Description
Document #: LTRT-27055