Tab
Call Duration
Call Type
Call Destination
Coder
Last Current Disconnect Duration
Line Current
Line Voltage
Hook
Ring
Line Connected
Polarity state
Line polarity
Message Waiting Indication
User's Manual
Field
Call duration (in seconds) from when call was
established.
Type of call:
IP address of called party.
Coder type used for the call.
Duration of the disconnect signal.
Note: The parameter is applicable only to analog
interfaces.
Line current (in mA).
Note: The parameter is applicable only to analog
interfaces.
Line voltage (in V).
Note: The parameter is applicable only to analog
interfaces.
Status of phone:
Note: The parameter is applicable only to analog
interfaces.
Status of ringing:
Note: The parameter is applicable only to analog
interfaces.
Line status:
Note: The parameter is applicable only to analog
interfaces.
Port polarity:
Note: The parameter is applicable only to analog
interfaces.
Line polarity:
Note: The parameter is applicable only to analog
interfaces.
MWI status:
874
Mediant 1000B Gateway & E-SBC
Description
"Voice": Voice call
"Fax": Fax call
"0": On hook
"1": Off hook
"0": Off
"1": On
"0": Disconnected
"1": Connected
"0": Normal
"1": Reversed
"2": N\A
"0": Positive
"1": Negative
"0": Off
Document #: LTRT-27055