AudioCodes Mediant 1000B User Manual page 885

User's Manual

To view success and failed call ratio:
1. Open the Success/Failure Ratio page (Monitor menu > Monitor tab > Performance
Monitoring folder > Success / Failure Ratio).
2. From the 'SRD/IP Group' drop-down list, select whether you want to view statistic for
an SRD or IP Group.
3. From the 'Index' drop-down list, select the SRD or IP Group index.
4. From the 'Direction' drop-down list, select the call direction:
•
In: incoming calls
•
Out: outgoing calls
•
Both: incoming and outgoing calls
5. From the 'Type' drop-down list, select the SIP message type:
•
INVITE: INVITE
•
SUBSCRIBE: SUBSCRIBE
•
Other: all SIP messages
If there is no data for the charts, the chart appears gray and "No Data" is displayed to the
right of the chart.

To refresh the charts:

Click Refresh.

To reset the counters:

Click Reset Counters.
Version 7.2
Figure 53-2: Viewing Success/Failure Ratio
885
53. Viewing Performance Monitoring
Mediant 1000B Gateway & E-SBC