Ini File Parameters; Snmp Parameters - AudioCodes Mediant 500L User Manual

Parameter

69.1.4 ini File Parameters

The parameters relating to ini-file management are described in the table below.
Parameter
[INIPasswordsDisplayType] Defines how passwords are displayed in the ini file.

69.1.5 SNMP Parameters

The SNMP parameters are described in the table below.
Parameter
Disable SNMP
configure system > snmp settings >
disable
[DisableSNMP]
configure system > snmp settings >
port
[SNMPPort]
[ChassisPhysicalAlias]
[ChassisPhysicalAssetID]
[ifAlias]
configure system > snmp trap > auto-
send-keep-alive
[SendKeepAliveTrap]
User's Manual
and configure a different number of output lines, by using the
window-height CLI command in the currently active CLI session.
Table 69-4: ini File Parameters

[0] = (default) Disable. Passwords are obscured ("encoded"). The
passwords are displayed in the following syntax: $1$<obscured
password> (e.g., $1$S3p+fno=).

[1] = Enable. All passwords are hidden and replaced by an asterisk
(*).
Table 69-5: SNMP Parameters
Enables and disables SNMP.

[0] No = (Default) SNMP is enabled.

[1] Yes = SNMP is disabled.
Defines the device's local (LAN) UDP port used for SNMP
Get/Set commands.
The range is 100 to 3999. The default port is 161.
Note: For the parameter to take effect, a device reset is
required.
Defines the 'alias' name object for the physical entity as
specified by a network manager, and provides a non-volatile
'handle' for the physical entity.
The valid range is a string of up to 255 characters.
Defines the user-assigned asset tracking identifier object for
the device's chassis as specified by OVOC, and provides
non-volatile storage of this information.
The valid range is a string of up to 255 characters.
Defines the textual name of the interface. The value is equal
to the ifAlias SNMP MIB object.
The valid range is a string of up to 64 characters.
Enables the device to send NAT keep-alive traps to the port
of the SNMP network management station (e.g., AudioCodes
OVOC). This is used for NAT traversal, and allows SNMP
communication with AudioCodes OVOC management
1010
Mediant 500L Gateway & E-SBC
Description
Description
Description
Document #: LTRT-10532