Configuring Gw User Info Table In Loadable Text File - AudioCodes Mediant 500L User Manual

User's Manual
Note:
as described in ''Enabling the User Info Table'' on page 807.

45.6.2.3 Configuring GW User Info Table in Loadable Text File

The GW User Info table can be configured as a User Info file using a text-based file (*.txt).
This file can be created using any text-based program such as Notepad. You can load the
User Info file using any of the following methods:

Web interface - see ''Loading Auxiliary Files'' on page 791

ini file, using the UserInfoFileName parameter - see ''Auxiliary and Configuration File
Name Parameters'' on page 1015

Automatic Update mechanism, using the UserInfoFileURL parameter - see Automatic
Update Mechanism
To add mapping rules to the User Info file, use the following syntax:
[ GW ]
FORMAT
PBXExtensionNum,GlobalPhoneNum,DisplayName,UserName,Password
Where:

[ GW ] indicates that this part of the file is the GW User Info table

PBXExtensionNum is the PBX extension number (up to 10 characters)

GlobalPhoneNum is the "global" phone number (up to 20 characters) for the IP side

DisplayName is the Caller ID (string of up to 30 characters) of the PBX extension

UserName is the username (string of up to 40 characters) for registering the user
when authentication is necessary

Password is the password (string of up to 20 characters) for registering the user when
authentication is necessary
Each line in the file represents a mapping rule of a single PBX extension user.
Note:
•
Make sure that there are no spaces between the values.
•
Make sure that the last line in the User Info file ends with a carriage return (i.e., by
pressing the <Enter> key).
•
To modify the GW User Info table using a User Info file, you need to load to the
device a new User Info file containing your modifications.
Below is an example of a configured User Info file:
[ GW ]
FORMAT
PBXExtensionNum,GlobalPhoneNum,DisplayName,UserName,Password
401,638001,Mike,miked,1234
402,638002,Lee,leem,4321
403,638003,Sue,suer,8790
404,638004,John,johnd,7694
405,638005,Pam,pame,3928
406,638006,Steve,steveg,1119
407,638007,Fred,frede,8142
408,638008,Maggie,maggiea,9807
Version 7.2
To configure the User Info table, make sure that you have enabled the feature
811 Mediant 500L Gateway & E-SBC
45. Auxiliary Files