AudioCodes Mediant 500L User Manual page 718

Parameter
Source IP Group
CLI: src-ip-group-name
[IPInboundManipulation_Src
IpGroupName]
Source Username Prefix
CLI: src-user-name-prefix
[IPInboundManipulation_Src
UsernamePrefix]
Source Host
CLI: src-host
[IPInboundManipulation_Src
Host]
Destination Username Prefix
CLI: dst-user-name-prefix
[IPInboundManipulation_De
stUsernamePrefix]
Destination Host
CLI: dst-host
[IPInboundManipulation_De
stHost]
Operation Rule - Action
Manipulated Item
CLI: manipulated-uri
[IPInboundManipulation_Ma
nipulatedURI]
Remove From Left
CLI: remove-from-left
[IPInboundManipulation_Re
moveFromLeft]
Remove From Right
CLI: remove-from-right
[IPInboundManipulation_Re
moveFromRight]
Leave From Right
CLI: leave-from-right
[IPInboundManipulation_Le
aveFromRight]
User's Manual
Defines the IP Group from where the incoming INVITE is received.
The default is Any (i.e., any IP Group).
Defines the prefix of the source SIP URI user name (usually in the
From header).
The default is the asterisk (*) symbol (i.e., any source username
prefix).
Note: The prefix can be a single digit or a range of digits. For
available notations, see ''Dialing Plan Notation for Routing and
Manipulation'' on page 999.
Defines the source SIP URI host name - full name (usually in the
From header).
The default is the asterisk (*) symbol (i.e., any host name).
Defines the prefix of the destination SIP URI user name, typically
located in the Request-URI and To headers.
The default is the asterisk (*) symbol (i.e., any destination username
prefix).
Note: The prefix can be a single digit or a range of digits. For
available notations, see ''Dialing Plan Notation for Routing and
Manipulation'' on page 999.
Defines the destination SIP URI host name - full name, typically
located in the Request URI and To headers.
The default is the asterisk (*) symbol (i.e., any destination host
name).
Determines whether the source or destination SIP URI user part is
manipulated.

[0] Source = (Default) Manipulation is done on the source SIP
URI user part.

[1] Destination = Manipulation is done on the destination SIP URI
user part.
Defines the number of digits to remove from the left of the user name
prefix. For example, if you enter 3 and the user name is "john", the
new user name is "n".
Defines the number of digits to remove from the right of the user
name prefix. For example, if you enter 3 and the user name is "john",
the new user name is "j".
Note: If both 'Remove From Right' and 'Leave From Right'
parameters are configured, the 'Remove From Right' setting is
applied first.
Defines the number of characters that you want retained from the
right of the user name.
Note: If both 'Remove From Right' and 'Leave From Right'
parameters are configured, the 'Remove From Right' setting is
applied first.
718
Mediant 500L Gateway & E-SBC
Description
Document #: LTRT-10532