AudioCodes Mediant 500L User Manual page 1058

Parameter
Proxy Address Table
Proxy IP Table
configure voip > proxy-ip
[ProxyIP]
Proxy Sets Table
Proxy Sets
configure voip > proxy-set
[ProxySet]
Registrar Parameters
Enable Registration
configure voip > sip-definition
settings > enable-registration
[IsRegisterNeeded]
Registrar Name
configure voip > sip-definition
proxy-and-registration > registrar-
User's Manual

For the SBC application: The challenge can be cached per
Account or per user whose credentials are known through the
User Info table.
The table defines proxy addresses per Proxy Set.
The format of the ini file table parameter is as follows:
[ProxyIP]
FORMAT ProxyIp_Index = ProxyIp_ProxySetId,
ProxyIp_ProxyIpIndex, ProxyIp_IpAddress,
ProxyIp_TransportType;
[\ProxyIP]
For more information, see ''Configuring Proxy Sets'' on page 378.
Defines the Proxy Sets.
The format of the ini file table parameter is as follows:
[ ProxySet ]
FORMAT ProxySet_Index = ProxySet_ProxyName,
ProxySet_EnableProxyKeepAlive,
ProxySet_ProxyKeepAliveTime,
ProxySet_ProxyLoadBalancingMethod,
ProxySet_IsProxyHotSwap, ProxySet_SRDName,
ProxySet_ClassificationInput, ProxySet_TLSContextName,
ProxySet_ProxyRedundancyMode,
ProxySet_DNSResolveMethod, ProxySet_KeepAliveFailureResp,
ProxySet_GWIPv4SIPInterfaceName,
ProxySet_SBCIPv4SIPInterfaceName,
ProxySet_GWIPv6SIPInterfaceName,
ProxySet_SBCIPv6SIPInterfaceName,
ProxySet_MinActiveServersLB,
ProxySet_SuccessDetectionRetries,
ProxySet_SuccessDetectionInterval,
ProxySet_FailureDetectionRetransmissions;
[ \ProxySet ]
For more information, see ''Configuring Proxy Sets'' on page 378.
Enables the device to register to a Proxy/Registrar server.

[0] Disable = (Default) The device doesn't register to
Proxy/Registrar server.

[1] Enable = The device registers to Proxy/Registrar server
when the device is powered up and at every user-defined
interval (configured by the parameter RegistrationTime).
Note:

The parameter is applicable only to the Gateway application.

The device sends a REGISTER request for each channel or
for the entire device (according to the AuthenticationMode
parameter).
Defines the Registrar domain name. If specified, the name is
used as the Request-URI in REGISTER messages. If it isn't
specified (default), the Registrar IP address, or Proxy name or IP
1058
Mediant 500L Gateway & E-SBC
Description
Document #: LTRT-10532