AudioCodes Mediant 500L User Manual page 730

and then click the Dial Plan Rule link located below the table; the Dial Plan Rule table
appears.
6. Click New; the following dialog box appears:
7. Configure a dial plan rule according to the parameters described in the table below.
8. Click New, and then save your settings to flash memory.
Table 37-3: Dial Plan Rule Table Parameter Descriptions
Parameter
Index
index
[DialPlanRule_RuleIndex]
Name
name
[DialPlanRule_Name]
Prefix
prefix
[DialPlanRule_Prefix]
User's Manual
Figure 37-3: Dial Plan Rule Table - Add Dialog Box
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Defines a descriptive name, which is used when associating the
row in other tables.
The valid value is a string of up to 15 characters.
Defines the prefix number of the source or destination number.
The valid value is up to 50 characters. The following syntax can
be used:

0-9: Specific digit.

x: Wildcard denoting any digit from 0 through 9.

z: Denotes a number from 1 through 9.

n: Denotes a number from 2 through 9.

a-z: Lower-case letter.

A-Z: Upper-case letter.

*: (Asterisk symbol) If it is the only character in the rule, it
denotes any number. To denote the asterisk "*" symbol itself,
precede it with the escape "\\" character (see below).

\\: (Backslash escape character) When it prefixes a wildcard
character (*, z, n, and x), the character itself is used and not
the meta-meaning. For example, "\\x" denotes the character
"x", while "x" is the wildcard denoting any digits from 0-9.

#: (Pound or hash symbol) When used at the end of the prefix
it denotes the end of the number. For example, "54324#"
represents a 5-digit number that starts with the digits 54324.

.: (Period) Denotes any letter or digit.
Mediant 500L Gateway & E-SBC
Description
730 Document #: LTRT-10532