Installing A License Key File - AudioCodes Mediant 500L User Manual

6. Click Apply New License Key; the following message box appears:
7. Click Reset; the device begins to save the file to flash memory with a reset and the
following progress message box appears:
When the installation completes, the following message box appears:
Figure 46-6: Reset and Save-to-Flash Success Message
8. Click Close to close the message box; you are logged out of the Web interface and
prompted to log in again. The features and capabilities displayed on the License Key
page now reflect the newly installed License Key.

46.3.2 Installing a License Key File

You can install a License Key by loading a License Key file through the Web interface.
When the device operates as a standalone device, the installation of a License Key can
also be done from a License Key file (or from a string, as described in Installing a License
Key String on page 819).
Note: The License Key installation process includes a device reset and is therefore,
traffic-affecting. To minimize the disruption of current calls, it is recommended to
perform this procedure during periods of low traffic.
User's Manual
Figure 46-4: Apply New License Key Message
Figure 46-5: Reset in Progress for License Key
820
Mediant 500L Gateway & E-SBC
Document #: LTRT-10532