AudioCodes Mediant 500L User Manual page 549

User's Manual
2. Click New; the following dialog box appears (e.g., Redirect Number Tel-to-IP table):
Figure 25-4: Redirect Number Manipulation for Tel-to-IP Table (Example) - Add Dialog Box
3. Configure a manipulation rule according to the parameters described in the table
below.
4. Click Apply.
Table 25-5: Redirect Number Manipulation Tables Parameter Description
Parameter
General
Index
[_Index]
Name
manipulation-name
[_ManipulationName]
Match
Destination Prefix
dst-prefix
[_DestinationPrefix]
Redirect Prefix
redirect-prefix
[_RedirectPrefix]
Version 7.2
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Defines a descriptive name, which is used when associating the row in
other tables.
The valid value is a string of up to 40 characters.
Defines the destination (called) telephone number prefix.
The default value is the asterisk (*) symbol (i.e., any number).
For manipulating the diverting and redirected numbers for call
diversion, you can use the strings "DN" and "RN" to denote the
destination prefix of these numbers. For more information, see
Manipulating Redirected and Diverted Numbers for Call Diversion on
page 552.
Defines the redirect telephone number prefix.
The default value is the asterisk (*) symbol (i.e., any number prefix).
549
Description
Mediant 500L Gateway & E-SBC
25. Manipulation