AudioCodes Mediant 500L User Manual page 357

User's Manual
Table 17-5: SIP Interfaces table Parameter Descriptions
Parameter
SRD
srd-name
[SIPInterface_SRDName]
General
Index
[SIPInterface_Index]
Name
interface-name
[SIPInterface_InterfaceName]
Topology Location
topology-location
[SIPInterface_TopologyLocati
on]
Network Interface
network-interface
[SIPInterface_NetworkInterfac
e]
Application Type
application-type
[SIPInterface_ApplicationType
]
UDP Port
udp-port
[SIPInterface_UDPPort]
Version 7.2
Assigns an SRD to the SIP Interface.
If only one SRD is configured in the SRDs table, the SRD is
assigned to the SIP Interface by default. If multiple SRDs are
configured in the SRDs table, no value is defined and you must
assign an SRD.
To configure SRDs, see ''Configuring SRDs'' on page 345.
Note:

The parameter is mandatory.

You can assign the same SRD to multiple SIP Interfaces (SBC
and Gateway).
Defines an index for the new table row.
Note: Each row must be configured with a unique index.
Defines a descriptive name, which is used when associating the row
in other tables.
The valid value is a string of up to 40 characters. By default, if you do
not configure a name, the device automatically assigns the name
"SIPInterface_<row index>" (e.g., "SIPInterface_1" when added to
Index 1).
Defines the display location of the SIP Interface in the Topology view
in the Web interface.

[0] Down = (Default) The SIP Interface element is displayed on
the lower border of the view.

[1] Up = The SIP Interface element is displayed on the upper
border of the view.
For more information on the Topology view, see ''Building and
Viewing SIP Entities in Topology View'' on page 388.
Assigns a Control-type IP network interface to the SIP Interface.
By default, no value is defined.
To configure network interfaces, see ''Configuring IP Network
Interfaces'' on page 145.
Note: The parameter is mandatory.
Defines the application for which the SIP Interface is used.

[0] GW = (Default) Gateway application.

[2] SBC = SBC application.
Defines the device's listening and source port for SIP signaling traffic
over UDP.
The valid range is 1 to 65534. The default is 5060.
Note:

The port must be different from ports configured for RTP traffic
(i.e., ports configured for Media Realms). For example, if the RTP
port range is 6000 to 6999, the SIP port can either be less than
357
17. Control Network
Description
Mediant 500L Gateway & E-SBC