Modifying Isdn-To-Ip Calling Party Number - AudioCodes Mediant 500L User Manual

User's Manual
Plan File'' on page 799).
3. Assign the Dial Plan index to the required routing rule:
•
SBC Calls: In the SBC IP-to-IP Routing table, do the following:
a.
b.
•
Tel-to-IP Calls (Gateway application): In the Tel-to-IP Routing table, do the
following:
a.
Note:

45.5.5 Modifying ISDN-to-IP Calling Party Number

You can use the Dial Plan file to change the Calling Party Number value (source number)
of the incoming ISDN call when sending to IP.
Use the following syntax in the Dial Plan file:
<ISDN Calling Party Number>,0,<new calling number>

<ISDN Calling Party Number>: Calling party number (or its prefix) received in the
ISDN call SETUP message. The source number can also be a range, using the syntax
[x-y] in the Dial Plan file. This number is used as the display name in the From header
of the outgoing INVITE.

The second number must always be set to "0".

<new calling number>: String of up to 12 characters containing the mapped number
that is used as the URI user part in the From and Contact headers of the outgoing
INVITE.
Below shows an example of such a configuration in the Dial Plan file:
[ PLAN1 ]
; specific received number changed to 04343434181.
0567811181,0,04343434181
; number range that changes to 04343434181.
056788118[2-4],0,04343434181
If we take the first Dial Plan rule in the example (i.e., "0567811181,0,04343434181"), the
received Calling Number Party of 0567811181 is changed to 04343434181 and sent to the
IP with a SIP INVITE as follows:
Via: SIP/2.0/UDP 211.192.160.214:5060;branch=z9hG4bK3157667347
From: <sip:04343434181@kt.co.kr:5060>;tag=de0004b1
To: sip:01066557573@kt.co.kr:5060
Call-ID: 585e60ec@211.192.160.214
CSeq: 1 INVITE
Contact:<sip:04343434181@211.192.160.214:5060;transport=udp>
Version 7.2
Set the 'Destination Type' field to Dial Plan.
In the 'Destination Address' field, enter the required Dial Plan index, where
"0" denotes [PLAN1] in the Dial Plan file, "1" denotes [PLAN2], and so on.
In the 'Destination Address' field, enter the required Dial Plan index using the
following syntax:
DialPlan<index>
Where "DialPlan0" denotes [PLAN1] in the Dial Plan file, "DialPlan1" denotes
[PLAN2], and so on.
The "DialPlan" string is case-sensitive.
805 Mediant 500L Gateway & E-SBC
45. Auxiliary Files