Pinging A Remote Host Or Ip Address - AudioCodes Mediant 500L User Manual

User's Manual
67

Pinging a Remote Host or IP Address

You can verify the network connectivity with a remote host or IP address by pinging the
network entity.

IPv4: The ping to an IPv4 address can be done from any of the device's VoIP
interfaces that is configured with an IPv4 address. The ping is done using the following
CLI command:
# ping <IPv4 ip address or host name> source [voip] interface
For a complete description of the ping command, refer to the CLI Reference Guide.
Version 7.2
67. Pinging a Remote Host or IP Address
995 Mediant 500L Gateway & E-SBC