Download Print this page
AudioCodes Mediant 500L MSBR Quick Setup Manual

AudioCodes Mediant 500L MSBR Quick Setup Manual

Multi-service business router
Hide thumbs Also See for Mediant 500L MSBR:

Advertisement

Quick Links

Mediant 500L MSBR
Quick Setup Guide
Welcome
Congratulations on purchasing your AudioCodes Mediant 500L Multi-Service Business Router (MSBR)
(hereafter, referred to as device)!
This document is only intended to provide basic setup instructions for initial access to the device and
connecting it to your network. For advanced configuration and cabling, refer to the device's Configuration
Notes and Hardware Manual respectively, which can be downloaded from AudioCodes Website at
https://www.audiocodes.com/library/technical-documents.
Before you begin, please read the
Pour consulter le guide rapide de l'équipement en français, consultez le site web AudioCodes suivant :
https://www.audiocodes.com/library/technical-
documents?productFamilyGroup=1647&productGroup=1648&docTypeGroup=Quick+Guides.
Package Contents
Make sure that the following items (in addition to any separate-orderable items that you may have purchased)
are included with your shipped device:
4 x anti-slide bumpers for desktop mounting
2 x Wi-Fi antennas (if ordered with Wi-Fi functionality)
2 x cellular antennas (if ordered with cellular functionality)
1 x AC/DC power adapter
Regulatory Information document
This Quick Guide
Safety Precautions
on page 6.
1 |
P a g e

Advertisement

loading

Summary of Contents for AudioCodes Mediant 500L MSBR

  • Page 1 Before you begin, please read the Safety Precautions on page 6. Pour consulter le guide rapide de l’équipement en français, consultez le site web AudioCodes suivant : https://www.audiocodes.com/library/technical- documents?productFamilyGroup=1647&productGroup=1648&docTypeGroup=Quick+Guides. Package Contents Make sure that the following items (in addition to any separate-orderable items that you may have purchased)
  • Page 2 Physical Description of Front Panel [Note: Availability of certain LEDs depends on the ordered interface.] Power LED indicating power status: Green On Power received by device No power Status LED indicating operating status: Green On Device is operational Green Flashing Initial rebooting stage or software upgrade in process Red On Boot failure...
  • Page 3 Physical Description of Rear Panel [Note: The number and type of port interfaces depend on the ordered hardware configuration.] POWER DC power plug entry for external AC/DC power adapter ON / OFF Power button to switch on (pressed in) and off (pressed out) the device. CONSOLE RS-232 serial interface port (RJ-45).
  • Page 4: Mounting The Device

     grooves located on the underside of the device. Mounting it in a standard 19-inch rack by placing it on AudioCodes 1U 19-inch rack mount shelf  (separate orderable item). The procedure includes attaching the shelf to the rack's front posts, and then placing the device on the shelf where it is securely held in position by the device's anti-slide bumpers which fit into the shelf's four square-openings.
  • Page 5: Cabling The Device

    Cabling the Device Cabling depends on your ordered hardware interfaces, for example, the type of WAN interface. (Only if ordered with LTE cellular) Insert the SIM card (supplied by your service provider) into the SIM slot. Connect the device's WAN port interface to the WAN. Connect the yellow Gigabit Ethernet ports (labeled GE LAN) to your LAN, using an RJ-45 CAT-5 Ethernet cable.
  • Page 6: Safety Precautions

    Use minimum 26-AWG wiring for FXO ports.  ©2020 AudioCodes Ltd. All rights reserved. AudioCodes, AC, HD VoIP, HD VoIP Sounds Better, IPmedia, Mediant, MediaPack, What’s Inside Matters, OSN, SmartTAP, User Management Pack, VMAS, VoIPerfect, VoIPerfectHD, Your Gateway To VoIP, 3GX, VocaNom, AudioCodes One Voice, AudioCodes Meeting Insights, AudioCodes Room Experience and CloudBond are trademarks or registered trademarks of AudioCodes Limited.