AudioCodes Mediant 500L User Manual page 251

Enterprise session border controller (e-sbc) & media gateway
Hide thumbs Also See for Mediant 500L:
Table of Contents

Advertisement

User's Manual
servers are assigned to LDAP Server Groups in the LDAP Servers table (see ''Configuring
LDAP Servers'' on page 252). To use a configured LDAP server, you must assign it to an
LDAP Server Group.
To use an LDAP server for call routing, you must configure its' LDAP Server Group as
"Control" type, and then assign the LDAP Server Group to a Routing Policy. The Routing
Policy in turn, needs to be assigned to the relevant routing rule(s). A Routing Policy can be
assigned only one LDAP Server Group. Therefore, for multi-tenant deployments where
multiple Routing Policies are employed, each tenant can be assigned a specific LDAP
Server Group through its unique Routing Policy.
To use an LDAP server for management user login authentication and authorization, you
must configure its' LDAP Server Group as "Management" type. Additional LDAP-based
management parameters need to be configured, as described in ''Enabling LDAP-based
Web/CLI User Login Authentication and Authorization'' on page 250 and ''Configuring
LDAP Servers'' on page 252.
The following procedure describes how to configure an LDAP Server Group through the
Web interface. You can also configure it through ini file (LDAPServerGroups) or CLI
(configure system > ldap ldap-server-groups).
Note:
("DefaultCTRLServersGroupin") in the LDAP Server Groups table, which can be
modified or deleted.
To configure an LDAP Server Group:
1.
Open the LDAP Server Groups table (Setup menu > IP Network tab > RADIUS &
LDAP folder > LDAP Server Groups).
2.
Click New; the following dialog box appears:
Figure 15-21: LDAP Server Groups Table - Add Dialog Box
3.
Configure an LDAP Server Group according to the parameters described in the table
below.
4.
Click Apply.
Table 15-8: LDAP Server Groups Table Parameter Descriptions
Parameter
General
Index
[LdapServerGroups_Index]
Version 7.2
The
device
provides
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
a
preconfigured
Description
251
Mediant 500L Gateway & E-SBC
15. Services
LDAP
Server
Group

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents