Configuring Sip User Part For Srs; Interworking Sip-Based Media Recording With Third-Party Vendors; Genesys - AudioCodes Mediant 500L User Manual

Enterprise session border controller (e-sbc) & media gateway
Hide thumbs Also See for Mediant 500L:
Table of Contents

Advertisement

User's Manual
'Call Setup Rules Set ID': 1
3.
In the Message Conditions table (see Configuring Message Condition Rules on page
421), click New, and then configure a Message Condition rule with the following
properties:
'Index': 0
'Name': CallRec
'Condition': srctags == 'record'
4.
In the SIP Recording Rules table, configure a SIP Recording rule as desired and
assign it the Message Condition rule that you configured in the previous step:
'Recorded IP Group': ITSP
'Condition': CallRec

15.2.4 Configuring SIP User Part for SRS

You can configure the SIP user part of the Request-URI for the recording server (SRS).
The device inserts this user part in the SIP To header of the INVITE message sent to the
SRS.
To configure the SIP user part for SRS:
1.
Open the SIP Recording Settings page (Setup menu > Signaling & Media tab > SIP
Recording folder > SIP Recording Settings).
Figure 15-8: Configuring User Part of To Header for SRS
2.
In the 'Recording Server (SRS) Destination Username' field, enter a user part value
(string of up to 50 characters).
3.
Click Apply.
15.2.5 Interworking SIP-based Media Recording with Third-Party
Vendors
The device can interwork the SIP-based Media Recording feature with third-party vendors,
as described in the following subsections.

15.2.5.1 Genesys

The device's SIP-based media recording can interwork with Genesys' equipment. Genesys
sends its proprietary X-Genesys-CallUUID header (which identifies the session) in the first
SIP message, typically in the INVITE and the first 18x response. If the device receives a
SIP message with Genesys SIP header, it adds the header's information to AudioCodes'
proprietary tag in the XML metadata of the SIP INVITE that it sends to the recording server,
as shown below:
<ac:GenesysUUID
xmlns="urn:ietf:params:xml:ns:Genesys">4BOKLLA3VH66JF112M1CC9VHKS1
4F0KP</ac:GenesysUUID>
No configuration is required for this support.
Version 7.2
239
Mediant 500L Gateway & E-SBC
15. Services

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents