AudioCodes Mediant 500L User Manual page 220

DHCP Option Code
Option 2
Option 66
Option 67
Option 120
Once you have configured the DHCP server, you can configure the following:

DHCP Vendor Class Identifier names (DHCP Option 60) - see ''Configuring the
Vendor Class Identifier'' on page 224

Additional DHCP Options - see ''Configuring Additional DHCP Options'' on page 225

Static IP addresses for DHCP clients - see ''Configuring Static IP Addresses for DHCP
Clients'' on page 227
Note: If you configure additional DHCP Options in the DHCP Option table, they
override the default ones, which are configured in the DHCP Servers table. For
example, if you configure Option 67 in the DHCP Option table, the device uses the
value configured in the DHCP Option table instead of the value configured in the
DHCP Servers table.
To view and delete currently serviced DHCP clients, see ''Viewing and Deleting DHCP
Clients'' on page 228.
The following procedure describes how to configure the DHCP server through the Web
interface. You can also configure it through ini file (DhcpServer) or CLI (configure network
> dhcp-server server <index>).

To configure the device's DHCP server:
1. Open the DHCP Servers page (Setup menu > IP Network tab > Advanced folder >
DHCP Severs).
User's Manual
DHCP Option Name
Time Offset
TFTP Server Name
Boot file Name
SIP Server
220
Mediant 500L Gateway & E-SBC
Document #: LTRT-10532