To Connect Mfcmu Output - Keysight Technologies B1500A User Manual

Figure 3-21
Installation
Mounting Connectors

To Connect MFCMU Output

The MFCMU output connection example is shown in
is for the MFCMU without the SCUU. Then Keysight N1300A-001/002 CMU cable
should be used for the connection between the MFCMU and the connectors you
mount. It is ok to leave open the ground wire extended from the CMU cable.
MFCMU Output Connection
Insulator
Plate
BNC connector
The Hcur/Hpot/Lcur/Lpot lines should be connected to the DUT as shown above.
Use a 50  coaxial cable (Keysight part number: 8120-0367) for the
Hcur/Hpot/Lcur/Lpot lines connection. Use a wire for the guard connection.
3- 42
Hcur
Wire
Guard
Hpot
Lpot
Guard
Lcur
Coaxial cable
Keysight B1500A User's Guide, Ed ition 14
Figure 3-21. This connection
to DUT 1
high terminal
to DUT 1
low terminal