Keysight Technologies B1500A User Manual page 172

Table 4-16
Specifications
Hardware
Pulse/DC output voltage and accuracy
Item
Output voltage (Vout)
a
Accuracy
Amplitude resolution
Output connectors
Source impedance
Short circuit current
Overshoot/pre-shoot/ringing
Output limit
a. At 1 s after completing transition.
b. Typical (± 1 %)
c. Specification condition: N  0.2 + Itotal < 3.0 A where, N is the number
of installed HV-SPGUs, and Itotal is DC current output by all modules
(including HV-SPGUs)
d. Following the specified condition with transition time.
• ALWG (arbitrary linear waveform generator) function
Arbitrary linear waveform generator (ALWG) mode
• Output complex waveform per one channel of HV-SPGU
• Define multi-level pulse and multi-pulse waveform including open state
pulse with ALWG GUI editor
• Sequential pulse waveform from user-defined pulse waveform
• 1024 points per one channel
4- 32
Value
-20 V to +20 V
-40 V to +40 V
± (0.5 % + 50 mV)
0.2 mV (± 10 V range)
0.8 mV (± 40 V range)
0.4 mV (± 10 V range)
1.6 mV (± 40 V range)
SMA
50 
b
800 mA peak (400 mA average
d ± (5 % + 20 mV)
Monitoring over current limit
Keysight B1500A User's Guide, Ed ition 14
Condition
50  load
open load
open load
50  load
open load
c
)
50  load