Keysight Technologies B1500A User Manual page 94

Table 3-4
Keysight 16493J Interlock Cable, 3 m or 1.5 m
Keysight 16493L GNDU Cable, 3 m or 1.5 m
Keysight 16493K
or 1.5 m, for the Kelvin connection
16495F provides the inputs 1 to 12 (6 Kelvin).
16495H provides the inputs 1 to 6 (3 Kelvin).
16495J provides the inputs 1 to 8 (4 Kelvin).
Keysight 16494A Triaxial Cable, 3 m or 1.5 m,
for non-Kelvin connection
16495H provides the inputs 1 to 6.
16495J provides the inputs 1 to 8.
Keysight 16493P SPGU Cable, 3 m or 1.5 m
16495H provides the inputs 7 to 12.
16495J provides the inputs 9 to 12.
Keysight N1300A CMU Cable
16495H provides the inputs 7 to 12.
16495J provides the inputs 9 to 12.
a. Use Keysight 16494B Kelvin Triaxial Cable to connect to Keysight E5250A
b. To extend the four-terminal pair (4TP) connection to the connector plate
Installation
Installing Accessories
To Connect Connector Plate
Cables
a
Kelvin Triaxial Cable, 3 m
Low Leakage Switch Mainframe or the connector plate for Keysight 4142B
Modular DC Source/Monitor by the Kelvin connection.
inputs, connect the Hcur and Hpot cables together and the Lcur and Lpot
cables together by using the BNC T-type adapter (female-female-male, Key-
sight part number 1250-2405), then connect them to the connector plate
inputs. To extend the 4TP connection to the DUT interface, connect the cables
to the connector plates input connectors individually, and connect the Hcur
and Hpot terminals together and the Lcur and Lpot terminals together on the
DUT interface. See Figure
It is ok to leave open the ground wire extended from the CMU cable.
3- 16
Connector
GNDU
odd number
even number
odd number
even number
odd number
even number
b odd number
, 3 m or 1.5 m
even number
3-21.
Keysight B1500A User's Guide, Ed ition 14
B1500A Terminals
Plate
Intlk Interlock
GNDU
SMU
or SMU
SPGU Output 1
or
Output 2
Hcur/Hpot
or CMU
Lcur/Lpot
Force
Sense
Force