About Module Installation - Keysight Technologies B1500A User Manual

WARNING
NOTE
NOTE
Installation
About Plug-in Modules

About Module Installation

Module installation must be carried out at a Keysight Technologies service center.
Contact Keysight Technologies for the module installation. Then send the following
equipment and accessories to Keysight Technologies.
• B1500A
• Plug-in modules to be installed
• ASU, for installing the exclusive SMU or retrofitting ASU only
• Connection cable between ASU and SMU, for installing the exclusive SMU or
retrofitting ASU only
• RSU, for installing WGFMU
• Connection cable between RSU and WGFMU, for installing WGFMU
For returning ASU or RSU, do not forget to notify the combination of the unit,
connection cable, and module channel.
To prevent electrical shock, turn the instrument off and remove the power
cable before removing the connection cables.
About B1500A which supports SPGU and WGFMU
SPGU and WGFMU are supported by the B1500A serial numbered JP40Nxxxxx and
later. The other B1500A needs the mainframe upgrade to support the module.
Contact Keysight Technologies to upgrade the B1500A.
Module locations after servicing
After the module installation, upgrade, and so on, the B1500A will be returned with
the module configuration decided by the rule shown in
change the module locations, consult the service personnel before servicing.
3- 62
Table
Keysight B1500A User's Guide, Ed ition 14
3-12. If you want to