Keysight Technologies B1500A User Manual page 92

Table 3-2
Keysight 16493J Interlock Cable, 3 m or 1.5 m
Keysight 16493L GNDU Cable, 3 m or 1.5 m
Keysight 16493K Kelvin Triaxial Cable, 3 m
or 1.5 m, for the Kelvin connection
Up to 3 SMUs can be connected to the 16442B
by the Kelvin connection.
Keysight 16494A Triaxial Cable, 3 m or 1.5 m,
for the non-Kelvin connection
Keysight 16493P SPGU Cable, 3 m or 1.5 m
Keysight N1300A CMU Cable
Installation
Installing Accessories
To Connect 16442B (B1500A-A5F)
Cables
a. To extend the four-terminal pair (4TP) connection to the 16442B inputs,
connect the Hcur and Hpot cables together and the Lcur and Lpot cables
together by using the BNC T-type adapter (female-female-male, Keysight
part number 1250-2405), then connect them to the 16442B inputs.
To extend the 4TP connection to the socket module inputs, connect the
cables to the PGU1, PGU2, VSU1, VSU2, VMU1, or VMU2 connector
individually, and connect the Hcur and Hpot terminals together and the
Lcur and Lpot terminals together at the socket module inputs.
It is ok to leave open the ground wire extended from the CMU cable.
3- 14
16442B
Terminals
Intlk
GNDU
SMU1
SMU2
SMU3
SMU4
SMU5
SMU6
SMU1
SMU2
SMU3
SMU4
SMU5
SMU6
PGU1
PGU2
a PGU1
, 3 m or 1.5 m
PGU2
Keysight B1500A User's Guide, Ed ition 14
B1500A Terminals
Interlock
GNDU
SMU Force
Sense
SMU Force
Sense
SMU Force
Sense
SMU Force
SMU Force
SMU Force
SMU Force
SMU Force
SMU Force
SPGU Output 1
Output 2
CMU Hcur/Hpot
Lcur/Lpot