"Expert" Menu; Damping - Endress+Hauser iTEMP TMT162 Operating Instructions Manual

iTEMP TMT162
Enter access code→  73
Navigation
Access status tooling→  74
Navigation
Locking status→  74
Navigation
Unit
Navigation

Damping

Navigation
Description
User entry
Factory setting
Endress+Hauser
14.3

"Expert" menu

The parameter groups for the Expert setup contain all the parameters of the "Setup"
and "Diagnostics" operating menus, as well as other parameters that are solely
reserved for experts. Descriptions of the additional parameters can be found in this
section. All the fundamental parameter settings for transmitter commissioning and
diagnostic evaluation are described in the "Setup menu"→  69 and "Diagnostics
menu"→  84 sections .
Setup → Advanced setup → Enter access code
Expert → Enter access code
Setup → Advanced setup → Access status tooling
Expert → Access status tooling
Setup → Advanced setup → Locking status
Expert → Locking status
14.3.1 "System" submenu
Setup → Unit
Expert → System → Unit
Expert → System → Damping
Use this function to set the time constant for current output damping.
0 to 120 s
0.00 s
Operating menu and parameter description
91