Operating menu and parameter description
Sensor n lower limit
Navigation
Description
Sensor n upper limit
Navigation
Description
Sensor serial number
Navigation
Description
User entry
Factory setting
94
Expert → Sensor → Sensor n → Sensor n lower limit
Displays the minimum physical full scale value.
Expert → Sensor → Sensor n → Sensor n upper limit
Displays the maximum physical full scale value.
Expert → Sensor → Sensor n → Serial no. sensor
Use this function to enter the serial number of the connected sensor.
String with up to 12 characters consisting of numbers and/or text
" " (no text)
"Sensor trimming" submenu
Sensor error adjustment (sensor trimming)
Sensor trimming is used to adapt the actual sensor signal to the linearization of the
selected sensor type stored in the transmitter. Compared to sensor transmitter matching,
sensor trimming only takes place at the start and end value and does not achieve the same
level of accuracy.
Sensor trimming does not adapt the measuring range. It is used to adapt the sensor
signal to the linearization stored in the transmitter.
Procedure
2. Set the Sensor trimming parameter to the Customer-specific setting.
3. Using a water/oil bath, bring the sensor connected to the transmitter to a known and stable temperature. A
temperature which is close to the set start of the measuring range is recommended.
1. Start
ß
ß
ß
iTEMP TMT162
Endress+Hauser