Operating Options; Overview Of Operation Options - Endress+Hauser iTEMP TMT162 Operating Instructions Manual

Operating options

22
6 Operating options
6.1

Overview of operation options

Operators have a number of options for configuring and commissioning the device:
• Configuration software →  27
HART® functions and device-specific parameters are primarily configured via the
Fieldbus interface. Special configuration and operating programs are available from
various manufacturers for this purpose.
• Miniature switch (DIP switch) and proof-test button for various hardware settings
– Hardware write protection is activated and deactivated via a miniature switch (DIP
switch) on the electronics module.
– Proof-test button for testing in SIL mode without HART operation. Pressing the button
triggers a device restart. The proof test checks the functional integrity of the
transmitter in the SIL mode during commissioning, in the event of changes to safety-
related parameters or generally at appropriate intervals.
1
ON
OFF
Proof-
Test
WRITE
LOCK
 13 Operating options of device
1 Hardware settings via DIP switch and proof-test button
2 HART® handheld communicator
3 PLC/DCS
4 Configuration software, e.g. FieldCare
5 Commubox: Power supply and modem for field devices with HART® protocol
6 Configuration via Field Xpert SFX350/370
7 Power supply unit and active barrier, .e.g. RN221 from Endress+Hauser
°C
7
iTEMP TMT162
3
2
PMC731: PIC0001
Online
1 >Group Select
2 PV 0.7 bar
HELP SEND HOME
Commubox
6 5 4
Endress+Hauser
A0024548