Process Unit Tag; Location Description; Longitude; Latitude - Endress+Hauser iTEMP TMT162 Operating Instructions Manual

iTEMP TMT162
User entry
Factory setting

Process unit tag

Navigation
Description
User entry
Factory setting

Location description

Navigation
Description
User entry
Factory setting

Longitude

Navigation
Description
User entry
Factory setting

Latitude

Navigation
Description
User entry
Endress+Hauser
Date in the format year-month-day (YYYY-MM-DD)
2010-01-01
Expert → Communication → HART info → Process unit tag
Use this function to enter the process unit in which the device is installed.
Up to 32 alphanumeric characters (letters, numbers and special characters)
32 x ' ? '
Expert → Communication → HART info → Location description
Use this function to enter a description of the location so that the device can be located in
the plant.
Up to 32 alphanumeric characters (letters, numbers and special characters)
32 x ' ? '
Expert → Communication → HART info → Longitude
Use this function to enter the longitude coordinates that describe the device location.
–180.000 to +180.000 °
0
Expert → Communication → HART info → Latitude
Use this function to enter the latitude coordinates that describe the device location.
–90.000 to +90.000 °
Operating menu and parameter description
105