No. Of Preambles; Configuration Changed; Reset Configuration Changed; Device Type - Endress+Hauser iTEMP TMT162 Operating Instructions Manual

Operating menu and parameter description
Additional information

No. of preambles

Navigation
Description
User entry
Factory setting

Configuration changed

Navigation
Description

Reset configuration changed

Navigation
Description
User entry

Device type

Navigation
Description
Display
Factory setting
102
The measured value can only be transmitted via the current value is the address is set to
"0". The current is fixed at 4.0 mA for all other addresses (Multidrop mode).
Expert → Communication → HART configuration → No. of preambles
Use this function to define the number of preambles in the HART telegram
2 to 20
5
Expert → Communication → HART configuration → Configuration changed
Indicates whether the configuration of the device has been changed by a master (primary
or secondary).
Expert → Communication → HART configuration → Reset configuration changed
The Configuration changed information is reset by a master (primary or secondary).
Activate the button
"HART info" submenu
Expert → Communication → HART info → Device type
Use this function to view the device type with which the device is registered with the HART
FieldComm Group. The device type is specified by the manufacturer. It is needed to assign
the appropriate device description file (DD) to the device.
4-digit hexadecimal number
0x11CE
iTEMP TMT162
Endress+Hauser