Operating menu and parameter description
User entry
Factory setting
Status signal
Navigation
Description
1)
Digital information available via HART® communication
User entry
Factory setting
116
• Alarm
• Warning
• Disabled
For detailed information see the ' O verview of diagnostic events' → 37
Expert → Diagnostics → Diagnostic settings → Status signal
A certain status signal is assigned at the factory to each diagnostic event in the categories:
sensor, electronics, process and configuration
for certain diagnostic events via the diagnostic settings. → 37
• Failure (F)
• Function check (C)
• Out of specification (S)
• Maintenance required (M)
• No effect (N)
For detailed information see the ' O verview of diagnostic events' → 37
1)
. The user can change this assignment
iTEMP TMT162
Endress+Hauser