Max. Update Period; Squawk - Endress+Hauser iTEMP TMT162 Operating Instructions Manual

iTEMP TMT162
Prerequisite:
Description
User entry
Factory setting

Max. update period

Navigation
Prerequisite:
Description
User entry
Factory setting
Device tag→  86
Navigation

Squawk

Navigation
Endress+Hauser
This parameter can only be selected if the Burst mode option is enabled.
Use this function to enter the minimum time span between two burst commands of burst
message X. The value is entered in the milliseconds unit.
500 to [value entered for the maximum time span in the Max. update period] parameter
as integers
1000
Expert → Communication → Burst configuration → Max. update period
This parameter can only be selected if the Burst mode option is enabled.
Use this function to enter the maximum time span between two burst commands of burst
message X. The value is entered in the milliseconds unit.
[Value entered for the minimum time span in the Min. update period] parameter to
3600000 as integers
2000
14.3.5 "Diagnostics" submenu
Detailed description →  84
"Diagnose list" submenu
Detailed description →  84
"Event logbook" submenu
Detailed description →  86
"Device information" submenu
Setup → Device tag
Diagnostics → Device information → Device tag
Expert → Diagnostics → Device information → Device tag
Expert → Diagnostics → Device information → Squawk
Operating menu and parameter description
111